Moderator

T3 season two, the multirotor one.

3689505259?profile=original

Its been a while so lets try again. Had a hangout with Chris and we briefly spoke about the next T3 round. Chris will work on a top prize ;-)

The mission is simple, get airborne climb to 20m 

Fly a cube with 50m sides, pausing for one minute at each corner, so your flight time cannot be anything less than 8 minutes..... Bonus points if you can stay longer at each corner....

The neatest cube KML wins.

If you can do this with a 3D aircraft I feel you would have a very strong chance of winning!

I will close the competition on April the 14th. I will be looking at where you are flying very closely. Please don't try this in public places or within 500m of any building / road. 

E-mail me when people leave their comments –

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • T3

    I have a cube ready to post. The KML and on board video are ready.  What information do you wan't?

    What is the prize?

  • Moderator

    I am surprised that no other controllers have been entered. In the early days of T3, with aircraft many different APs would enter. 

    Six days to go folks....

  • Gary, I agree.  I think we've got the basic flight stuff down.  I did a bunch of manual stab flights with my 450 heli on the weekend, but that got kinda boring so I started hot-dogging it until I hit a light pole...  I find it more fun to push my limits on what I can do in the auto modes, which was one of the main reasons I did this.  To prove it to myself.  (But I would graciously accept a prize! :D )

    What is the price to unlock the waypoint functionality of ZeroUAV?  Just curious.

    And what's the situation with WK-M.  It has some ability right, and at what price?

    What happened to AeroQuad navigation?

    How come no MK entries?

  • T3

    There are other pilots with autopilot that are ready to compete but what is the prize?

  • Moderator

    Well perhaps this round will push what can happen with controllers a little. The point of competitions really.

    Flying a multi around bores me to tears. Lets get them working!

  • What about YS-XS or whatever it's called?  

    MK should do it I think?  WK-M of course, does it have enough waypoints?

    Of DJI Ace One for Helis at $11,000!

    LOL

  • We've still got a couple weeks right?  Still hoping to get a tradheli entry.  Gonna be tight but my new big heli is almost ready...

  • Moderator

    Excellent work from everybody with the guts to give it a go. Still very surprised that no other AP has entered. T3 was never APM only. Once again though, well done!

  • 3D Robotics

    Richard: Fantastic video! Tweeting...

  • Developer

    Richard,

        Great work!  Nice to see the video.

        Re Alt-Hold, I've heard that from one other person recently (although they were using an APM1).  2.9.1b has a wider acceptable range of accelerometer aliasing...it's 3m/s vs 1m/s in 2.9.1.  This plus reducing the INAV_TC_Z from 7 to 5 will likely make it more reliable.  There's a slight downside to having the TC at 5 which is that bad barometer behaviour can also appear.  On  my copter this means it does a little dip after flattening out after a highspeed forward flight.  Most people probably won't notice the difference but if you do you can always increase the TC back up to 6 or 7.

This reply was deleted.