Blogs

Dear Friends,

this is the first images from VR Lab . In these pictures you can see our entry level frame VR CopterX4-8

The frame make using good materials as Carbon Fiber and Ergal .

The frame configuration was an idea of Flavio Taborelli , that inside Virtualrobotix.IT is the CTO of mechanical department. This frame doing 2000 hours of flight without chrash so we decide to use this approach for develop our affordable frame.

On a Ready to Fly revision of Drone you can put :

• VR Brain 4.5 as flight controller .
• VR IMU Gold.
• UBlox GPS
• 4 or 8 x 30 Amp SimonK VR ESC
• 4 or 8 T-Motors
• 4 or 8 Propellers until 13''
• 3DR telemetry link
• Battery until 10'000 mah 3S-6S

FPV version

• Video TX for FPV
• Micro Camera for FPV with servo motor for control the pitch of view.

Observer revision .

• Full VR Gimbal 3Axis
• Battery 2-3S for gimbal.

The production of this frame will be start at the end of August .

The main advantage is that is a fully customizable and available as DIY KIT on in RTF configuration. This kind of frame is very good for hacking is possible to customize the cover with your color or layout :

or fully customize your frame this is an example :

All the frame is developed inside VR Lab using advanced mechanical 3D Cad.

In the next week will be some updates about the status of the project.

If you need more info or have suggestions we are happy to disucss with you about our last VR Copter

original blog post : http://www.virtualrobotix.com/profiles/blogs/vr-lab-present-last-drone-developed-in-virtualrobotix

if you like our project Support our work and join us on our facebook community :)

https://www.facebook.com/pages/VirtualRobotix-wwwvirtualrobotixcom/149125448465971

Best

Roberto