Gender
Male
About
Please tell us a bit about your UAV interest
Hobby
Hometown:
..
Activity Feed
"SOLVED!, Finaly it was a ESC sync failure. I've change all to Rotor X 40A and it works fine.
I did a Autotune and works well.
Thanks, "
I did a Autotune and works well.
Thanks, "
"I don't activated IMU log, i dont know if i have vibration, but in the video i see a lot of vibration at full forward, but i dont know if only is the gimbal or all,
Baro and Gps glich was after chash. I have all the electronics separated from esc…"
Baro and Gps glich was after chash. I have all the electronics separated from esc…"
"Thanks,
I´m thinking to change my esc to hobbywing xrotor 40a, many people says its work well with my motors.
I will change all wiring for posible brownout (ground loop) and change esc.
Waiting for china post, i will comment if this issue will…"
I´m thinking to change my esc to hobbywing xrotor 40a, many people says its work well with my motors.
I will change all wiring for posible brownout (ground loop) and change esc.
Waiting for china post, i will comment if this issue will…"
Hi,I´m desperated about this issue. My quadcopter has fall down 3 times about this issue.My config is, Tarot 650 Sport8000 mah 4SAfro ESC 30aTurnigy 4108 480kv15x7.5 CF props2,7 kg AUWController and video with second baterry, 8000 mah only for esc…
