Please tell us a bit about your UAV interest
I am a beginner, trying to assemble and fly my first drone.
About
Hometown:
London
Activity Feed
"I see. Well, for the DJI ESCs I have it is not possible to calibrate them (if you try, it won't go into the calibration mode), it's simply not necessary.
I tried flying the quadcopter again today after letting it sit for three days. Guess what -…"
I tried flying the quadcopter again today after letting it sit for three days. Guess what -…"
"It certainly can't hurt, but as I said: In Mission Planner I can see that the APMcopter software gives less power to the rear motors, so it's something that will have to be resolved via APMcopter, not with an ESC calibration. If there only was a…"
"I did not perform an ESC calibration because I use the ESCs from the DJI Flame Wheel F450 set and those do not require calibration."
"You seem to have misunderstood. The quadcopter is placed on a flat surface, set to Stabilize mode. I arm the quadcopter and add power. The two front motors spin normally, one of the motors in the back does not spin and the other one spins very…"
Hello,I built my quadcopter with APMcopter/Arducopter and I use Mission Planner on Windows to fly it. There are no extra external sensors such as compass or GPS or cameras - I have those but didn't install them just yet - and want to try out the…
Hello diydrones community,I recently got into quadcopter flying with a Hubsan X4, now I want to build my first own quadcopter. This week I received all the parts that I need, based on a DJI F450 Flame Wheel ARF kit.After reading all about the…
