About

Gender

Male


Location

Vieira do Minho


About Me:

Developer


Please tell us a bit about your UAV interest

Y6 and Quad config.


Hometown:

New York


Activity Feed

Christopher Correia commented on Stefan Gofferje's blog post 3m wingspan fiberglass UAV from Hobbyking
"The prop Gareth is using in the vídeo is not the best, in my modest oppinion, for this model. I believe in the 14" pusher prop ;) the only thing you have to be careful with is your take-off angle because it goes  slightly passed the lower tail fin.…"
Aug 4, 2013
Christopher Correia commented on Stefan Gofferje's blog post 3m wingspan fiberglass UAV from Hobbyking
"This is the motor I'm using http://www.hobbyking.com/hobbyking/store/__19029__Turnigy_G60_Brush...
With a 14inch pusher prop dieferent from yours, anyway... I'm not expecting more than 15 min of flight with a total load of around 5.2Kg. That's not…"
Aug 4, 2013
Christopher Correia commented on Stefan Gofferje's blog post 3m wingspan fiberglass UAV from Hobbyking
"You don't have to set your battery or ESC far from your motor, because you have a huge amount of space in the rear. The wings won't flap because the rod is long enough. You allso have more than enough space right the Cof G point for any autopilot…"
Aug 3, 2013
Christopher Correia commented on Stefan Gofferje's blog post 3m wingspan fiberglass UAV from Hobbyking
"Why all the fuss about this model? It flys like a boss even with no APM or stabilizer just bareback receiver and weight in the front hull for CofG balance. I really don´t understand all the doubts abot this.
https://www.youtube.com/watch?v=W7JerXiqOL4"
Aug 3, 2013