Gender
Male
About
Please tell us a bit about your UAV interest
Fixed Wing Multi-Rotor Helicopter Software
Hometown:
Babylon
Activity Feed
"Chris can you help out with writing a custom flight plan script? I can provide you a consulting fee.
This offer is open to anyone on the board as well that wants to help out. Thx.."
This offer is open to anyone on the board as well that wants to help out. Thx.."
"Hello Chris how would I script changing the radius using a signal from the Tx. I have never tried setting up an input to send a mavlink command?
Thank you in advance"
Thank you in advance"
Looking for some guidance on how to change the loiter radius while orbiting over a point.Here is the scenerio, the plane will be loitering over a waypoint with a 10 meter radius.I would like to instruct the plane to increase the radius to 15 meters…
"Hi Ultrafuge,
My throttle does work both in Stab and Acro, but it does not spin until the mid throttle range.
I want proportional control for the full throttle range.
I do not want the throttle to cut off if I am at 1/4 throttle.
I am using mode 1…"
My throttle does work both in Stab and Acro, but it does not spin until the mid throttle range.
I want proportional control for the full throttle range.
I do not want the throttle to cut off if I am at 1/4 throttle.
I am using mode 1…"
Hello all.I am having an issue with my throttle in ACRO; the throttle does not react until its at its midpoint 1500.Been searching and reading a lot to threads, but no luck so far. I am sure there is a simple fix. Working on a Trex 450 APM 2.6 with…
