Gender
Male
About
Location
Inver Grove Heights, MN
About Me:
i have been following youtube videos for building the ZRM250, dragonfly32 Pro, with the DSY BE1806-13 brushless motors and DSY 20AMP ESC's SN20A, and a taranis X9D and D4r PPM. when turning the motors on in clean flight, all motors are steady but as soon as i give it any throttle on the taranis all the motors go out of sink, motors 2 and 3 start to ramp to full speed as motors 1 and 4 ramp down to min. any idea what can be done to fix this.
Please tell us a bit about your UAV interest
a hobbie to hopefully turn in to racing
Hometown:
St. Paul, MN
Activity Feed
"i have calibrated the ESC's and i have calibrated the accelerometer it always does the same thing. it was double checked that the wiring was correct by my buddy that has this same model flying. "
"dragonfly32 Pro
DYS BE1806-13 brushless motors
DYS 20Amp ESC SN20A"
DYS BE1806-13 brushless motors
DYS 20Amp ESC SN20A"
when turning the motors on in clean flight, all motors are steady but as soon as i give it any throttle on the taranis all the motors go out of sink, motors 2 and 3 start to ramp to full speed as motors 1 and 4 ramp down to min. any idea what can be…
