Gender
Male
About
Location
Brandon, FL
About Me:
Work at an environmental company doing r&d work.Would love to fly drones and do the photography thing with it.
Please tell us a bit about your UAV interest
Photography, and getting into racing drone after I get the flying down.
Hometown:
Brandon
Activity Feed
"Thanks for your help, fixed the issue."
"I went to program files, mission planner, scrolled down to the most current file. I followed the directions I found online. I made a copy of the auto analyze file, though I don't think that helps. I will attempt to send another file. If there is…"
"Battery voltage in mission planner is all over the place, never did work, tried on many occasions to correct that but since it never interfered with flight it wasn't an issue. Battery voltage tested by meter and charger is 16.8V on a 10000mah…"
"Failsafe is enabled, I have tried it with the battery connected and works fine while connected to the USB, when USB disconnected the battery fail safe buzzer goes off and as you know you can't arm the drone, nor would you want to. I need any help I…"
When connected to mission planner by usb my hexacopter tests fine, I can even start it up using the radio. When I disconnect from mission planner and go out to fly the drone gets gps lock the light on the Pixhawk fc starts flashing yellow. I have…
