A curious problem here. I'm not getting any power on the PX4IO ACC_POWER_5V rail, which is necessary for powering the 3DR radio.Here's the system setup:PX4FMU v1.7PX4IO v1.33DR GPS + compass module (GPS plugged into FMU GPS port, compass plugged…
"Apologies for the slow reply on this. Here's a screenshot: http://i.imgur.com/d49SnZe.png It appears that in APM Planner v2.0.0 RC3 I can't set the number of jumps to -1 (it won't accept any negative value), so I've just set it to 10000 instead."
"Great, thanks for the reply. That certainly cleared up a lot. What you said about going home after the flight plan is complete now makes a lot of sense. The initial waypoints were set up with a very large radius, so it didn't really need to fly far…"
Hello everyone,I've got a little problem here which I'm sure must have been solved hundreds of times. I think I understand how I'm meant to fix it but I'd like to confirm before taking the plane out again.The scenario:Platform is a PX4 + 3DR…