"Unfortunatley I couldn't find the code for MAVProxy but I found my code using MavUtil.
Because the code was for work, I can only show the initialization and the generic rc sending command. I truly hope it helps you resolve your issue. I'm sure…"
"Like I said the problem was last July and I haven't touched it since. My best advice is to start over with a clean slate. Mine was easy to restart because it was a Raspberry Pi so reformatting was simple but if you're using a laptop, I know it's…"
"I did, but my error was actually in mismatched versions of installed software. Granted this was almost a year ago. Not sure of how much help I could be :("
On an x86 system, I'm using Python 2.7.3 and installed pymavlink and mavproxy. I then used the same source files to compile, build, & install on a Raspberry Pi, but I get an attribute error 'x25crc'. After searching online, I found someone…
"Thanks for the reply. I've currently moved away from MAVProxy and am just writing my own python script from importing mavutil.py. So far on x86 it's working well (I'm connecting and parsing messages), but on ARM (RPi) it's giving an x25crc…"
Hi all, I was using an Iris quadcopter with 3.1.2 and was using a Raspberry Pi to use mavproxy to send autonomous commands. Due to some issues, my team decided to upgrade to 3.2.1 and recalibrate. Now when I would run the ~May_2014 git version of…
I can't seem to find what I'm looking for on the MAVProxy homepage and I'm still in process of looking through the source.What do I send via MAVProxy for various RC controller override/emulation commands? I thought it would just be"rc <channel>…
I currently have an Iris quadcopter which has a PixHawk with 3.1.2 firmware installed.I'm getting a "Failure : unsupported command 400" when trying to "arm throttle" through APM Planner on Windows and pymavlink on Linux (however it can be armed with…