Gender
Male
About
Please tell us a bit about your UAV interest
own several mutlicopters
Hometown:
Monaco
Activity Feed
"@Alexis - again, I only see references to iOS and Android."
"@Alexis Can you point me to information about how to tab to MavLink on board on the H520?"
"Looking at Yuneec's SDK website, it rather looks like a DJI approach: SDK for Android and iOS but nothing about direct MAVLink access or how to get the MAVLink and video streams out of the device to some companion computer. Disappointed :-("
"@Yang Wang: If you are using the A3 I would also definitely use the API/SDK instead of fumbling with the CAN bus."
"@Yang Wang: apparently you can connect to the camera via USB RNDIS (virtual ethernet) and then get raw h.264 frames via UDT on 192.168.1.3 port 9000Looks like making sense of the CAN bus gimbal and camera controls is the bigger problem."
"After some more googling, it seems some other people got working systems too: https://www.rcgroups.com/forums/showthread.php?2439038-Hacking-Insp..."
"nice!
As the DJI Manifold companion computer seems to be discontinued there is basically no way to access DJI cameras directly. This thread on github indicates that it is possible on NVIDIA systems with a proprietary decoding library but does not go…"
As the DJI Manifold companion computer seems to be discontinued there is basically no way to access DJI cameras directly. This thread on github indicates that it is possible on NVIDIA systems with a proprietary decoding library but does not go…"
"I agree, it indeed is a great deal.
My worries are mostly that I don't know if I can still get Solos (as I assume there won't be any follow-up model) in case I want more of them a few months down the line."
My worries are mostly that I don't know if I can still get Solos (as I assume there won't be any follow-up model) in case I want more of them a few months down the line."
"Thanks, Chris. From what I have seen the problem with GoPro Karma and Yuneec drones is that it seems to be impossible to physically access the telemetry port. (I read in other threads that you can access it for Yuneec drones but they put some…"
Hi,now that DJI dominates the market and all 3DR RTF consumer models like to Solo are more or less dead - are there still any companies building RTF drones with PX4/Pixhawk?RegardsPaul
"Good to hear that you got it working :)
Happy to help - keep the money.
Paul"
Happy to help - keep the money.
Paul"
"Hi Thijs,
I had the same problem and it took me forever to figure out what was going wrong.
Reviewing your google docs document shows that you most likely encountered the same problem.
It is – vs -
replace raspivid -ih -t 0 -w 1280 -h 720 -fps 30…"
I had the same problem and it took me forever to figure out what was going wrong.
Reviewing your google docs document shows that you most likely encountered the same problem.
It is – vs -
replace raspivid -ih -t 0 -w 1280 -h 720 -fps 30…"
