"I may owe you a beer.

I swapped the ESC's and still have the issue. I took a more kenetic approach and felt the play in the arm and noticed it was more giving than the other arms. Upon further inspection, I noticed what appears to be two tears in…"

"Thanks for your input Gerard.

Im looking into this as a possible ESC issue. I am going to swap the ESC with one from a working arm, as well as replace the arm and will update the discussion with the results.

Appreciate the help.
Chris"

"Ive replaced both the prop (with a brand new one fresh out of the package) as well as the motor. I went through all the screws on the frame and tightened everything down and still having the issue... Im starting to narrow this down to a potential…"

"Ended up mounting the gimbal arm directly to the frame, seems to have solved the issue. I believe the rubber grommets on the anti vibration section of the arm was amplifying any oscillations so I removed it completely. thanks for the help guys."

"So i took it back out and tried a few things. First i disconnected the roll and pitch motors from the controller individually and then flew the gimbal with one motor at a time. the virbations were occuring on both axises. I then wired up a seperate…"

"great minds think alike. Ill let you know what I come up with, as i think it may be an external vibration interfering with the IMU, which has been my greatest fear. Unfortunatly I dont have alot of the tools i need to check the vibrations on the…"

"Well i tried diffrent extremes with the PID and power settings. some to the point that the gimbal was borderline spazzing out, but they all have the same effect. the only thing i havent done is tried mounting the gimbal directly to the frame (i.e.…"