Gender
Male
About
Location
cheshire
Please tell us a bit about your UAV interest
drones
Hometown:
uk
Activity Feed
"the gimbal will be added later when i get the bushless controller and also add hd cam to it
as for the x plates it gives more support to the motor on bottom and also allows a few more mm clearance on rear and makes the motors more rigid where they…"
as for the x plates it gives more support to the motor on bottom and also allows a few more mm clearance on rear and makes the motors more rigid where they…"
"also the carbon fiber blades make a huge difference to noise and a lot more stable flight and hover"
"i have got rid of some bits now updated and modified 3.1.3 firmware and test flight went well just some more tuning to do it fly's really stable but have to be careful on landings with tail blades
here are some new better pictures
i will post some…"
here are some new better pictures
i will post some…"
"yes had to edit the code to only use tail for yaw
i have had it flying in garden but waiting for a nice day but it does fly ok on firmware mod i made
it looks alot better better cable management and video tx on tail and anti vibration mount for apm"
i have had it flying in garden but waiting for a nice day but it does fly ok on firmware mod i made
it looks alot better better cable management and video tx on tail and anti vibration mount for apm"
"waiting for nice day to tune it up will post flight time soon as it flying well"
This is my first build of a drone used to have ar drone 2.0frame: HUNTER VTAIL 500MM BY DIALFONZOcontroller/autopilot: APM 2.6 3dr custom edit of firmware ArduCopter V3.1.2 stable for Hunter V-Tailmotors: SunnySky X2212 980KV Outrunner Brushless…
"frame: HUNTER VTAIL 500MM BY DIALFONZO
controller/autopilot: APM 2.6 3dr custom edit of firmware dev 3.2 for V-Tail
motors: SunnySky X2212 980KV Outrunner Brushless Motors
esc: JMT 30A Brushless ESC Speed Controller
propellers: APC 10 x 4.5…"
controller/autopilot: APM 2.6 3dr custom edit of firmware dev 3.2 for V-Tail
motors: SunnySky X2212 980KV Outrunner Brushless Motors
esc: JMT 30A Brushless ESC Speed Controller
propellers: APC 10 x 4.5…"
