Location
Lincroft, NJ
About
About Me:
I am new, have an ardu 3dr
Please tell us a bit about your UAV interest
Hobby
Activity Feed
Not sure if this is the right area.I have the below:ACRTF2ArduCopter 3DR Quad - Ready to Fly - w/ basic electronics[Telemetry electronics:Full 2-way Telemetry 900Mhz][Sonar sensor:MB1200 Sonar][Frame Mode:X][Camera Mount:Yes][USB Cable:USB Mini-B…
"Here is how it is connected now."
"Just so I have this straight. I should have the lipo & usb connected for this right? Also should the 4 wire cable that connects the APM and the power distribution board be connected? I want to verify that I am doing this correctly. I am getting…"
"OK. I got the APM to connect to MP. I was able to load the 2.5 Firm to the APM and successfully get all of the readings. The transmitter and receiver are now binded. So far it looks like everything is working. Except I cannot get the ESC's to arm.…"
"Thank you! Seems to have done the trick. It is now binded. However now I am trying to get the motors to spin up from the throttle. No luck. Next goal is to get it to read from the PC to start the simulator."
"OK. Thanks for the help, but I still do not have any lights on the receiver. I have attached another picture of how I have it attached.Thanks for the help."
"Here is the update. I have connected Pin 3 to the throttle on the receiver. I also have moved the power to AUX 1. Still now lights on the receiver. Am I doing something wrong?IMG_4581.JPG"
Hi,I am working on my first Arducopter 3DR. I am through the build and have reached a block. I am not receiving any power lights on my AR8000 receiver. I have the lipo connected and what I believe to be the right pin out on from the APM to the…
