Gender
Male
About
Location
Yper
Please tell us a bit about your UAV interest
I have a passion for robotics and everything in the air since a very young age
Hometown:
Yper
Activity Feed
"Hi Sam
Thanks for the feedback. What if I take T motors:
http://www.rctigermotor.com/html/2013/Professional_0912/43.html
Or is this not powerful enough?
Bests
Wouter"
Thanks for the feedback. What if I take T motors:
http://www.rctigermotor.com/html/2013/Professional_0912/43.html
Or is this not powerful enough?
Bests
Wouter"
Hi everyoneWe're building a multicopter using an X8 setup. Our challenge is that we have to build a very small copter which can lift a heavy weight. The total frame weight is 2kg (with battery but without payload). The payload is 3-4kg. So the max…
"Hi Crady
Great news, problem solved. I found my mistake, a very stupid one..
The pins from my ESC to my PDB where upside down. So I just reversed them.. And now my 4 motors rotate :D
Thanks a lot for your help!
Bests
Wouter"
Great news, problem solved. I found my mistake, a very stupid one..
The pins from my ESC to my PDB where upside down. So I just reversed them.. And now my 4 motors rotate :D
Thanks a lot for your help!
Bests
Wouter"
"I did the mandatory hardware configuration again and I tried to arm my APM while my mission planner was connected. I moved the throttle stick down-left and after a few seconds I received the 'ARMED' message on my mission planner. The motors didn't…"
"Hi Martin
I tried, nothing happens. Another option?
Bests
Wouter"
I tried, nothing happens. Another option?
Bests
Wouter"
"Hi Crady
No doesn't work. The APM's doesn't ARM..
Check this video: http://youtu.be/LXA2U_Rby5s
What does this mean if I can't arm my APM?
Thanks
Wouter"
No doesn't work. The APM's doesn't ARM..
Check this video: http://youtu.be/LXA2U_Rby5s
What does this mean if I can't arm my APM?
Thanks
Wouter"
"See the video I made: https://www.youtube.com/watch?v=egqZjqdlAkI"
"Thanks, I did, everything is the same, I just don't have the same number of beeps."
"Hi Crady
See this picture (I'll add this to my post):"
See this picture (I'll add this to my post):"
HiI have a DIY 3DR quadcopter using a 3DR 2.6 APM. I successfully did the radio control calibration with my mission planner. I'm using a Spektrum DX8 transmitter and a Spektrum AR8000 receiver.But I fail in ESC calibration.. I did everything in the…
