1 motor act strangely/ getting hot

quad spec:

f450 frame
Lipo 2200 battery
APM2.8 board
SimonK ESC 30A
Sunnysky Angel Series A2212-13 980kv
1045 propeller

im having a great fly before just until im trying to remove waving video. i mount rubber foam on my motor, and now it start to act strangely..

once i calibrate, all looks fine

after calibrate, i try increase the thro, and all work nicely which is same condition like during my calibration moments.

all of it stop until i put the prop.. it start to act strangely.once i up the thro, sometimes on the first thro up, it will rotate, but after land position, which thro down, once i increase the thro, the motor start to act seems not enough power, then i try spam power to thro, it might rotate as normally.

it might fly too, but after fly, the motor will be hot. any idea on what happen?

sorry if u cant understand my explanation. 

i will try to upload video later. ty for any idea,recommendation or suggestion ^_^

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • beeping

    motor keep beeping.mp4

  • i notice that my 1 wire on my esc broken, then i resolder it, once i resolder, it keep beeping all the time, any idea? i will post the video 

  • "...i mount rubber foam on my motor..."

    It might be a language thing, but this sounds like a bad idea.  Maybe a picture?

  • Defective motor/windings, most likely you can see some discolored windings inside.
    • did u mean discolored windings inside the motor? 

      its seems no change in it

This reply was deleted.

Activity