Discussions

ACM 2.0.30 indoor test / RAW log!

Posted by Helldesk on June 30, 2011 at 3:26am

Today I did an 11-minute indoor flight test with my quad. I had RAW logging on if the developers might be interested in it... My OilPan filters are not soldered, yet. What do you think? My gut feeling is that the quad is a bit too heavy; it requires more than half throttle to fly.

21 amps (peak and average), 43 watt hours, 240 watts peak, 3.867 amp hours, 10.79 volts minimum.

DT750 motors + EPP 1045 props, 18A Turnigy Plush ESC.

APM 1280 / OilPan Rev H without filters.

30-06-11_1.log

You need to be a member of diydrones to add comments!

Join diydrones

indoor, log, raw

Email me when people reply –

Replies

Brandon June 30, 2011 at 12:56pm

You know you got me thinking, my quad requires more than half the throttle applied in order to get it airborn as well. I would like to know how much throttle other people apply to get their quad airborn.
Manel Garcia June 30, 2011 at 11:37am

Good balanced quad

Let me now your radio Exponential and D/R

Thanks
Helldesk June 30, 2011 at 5:43am

The twitch at around 9:36 can be seen around line 32756 of the log. I wonder what that was - did the ESC of that motor have a dizzy spell?