Discussions

Developer

ACM v2.0.49 w/ MP v1.0.89 CLI not reading properly

Posted by Adam Rivera on November 6, 2011 at 10:38am

Hello all,

 

I am running the latest MP and ACM code but for some reason the Mission Planner cannot read the data properly from the ACM board. All I get on the screen is a bunch of random characters like ???D/?c/?. I triple checked that the slider is in the CLI position (back towards the servo in/out pins). Any advice?

 

Thanks,

 

Adam

You need to be a member of diydrones to add comments!

Join diydrones

Tags: cli
Email me when people reply –
Follow

Replies

  • 3D Robotics
    Chris Anderson November 6, 2011 at 10:48am

    I can't replicate any problem. Are you sure your baud rate is 115k?

  • Developer
    Adam Rivera November 6, 2011 at 10:44am

    Also, the Power, MUX and PPM led lights on the main board are solid. The A light on the shield just blinks and the power led on the shield is solid.

  • Developer
    Adam Rivera November 6, 2011 at 10:40am

    Also, MP will not connect via Mavlink either. Nothing has changed in my configuration except the firmware.

This reply was deleted.

Activity

Neville Rodrigues liked Neville Rodrigues's profile
Jun 30
Santiago Perez liked Santiago Perez's profile
Jun 21
More…