Hello! I'm new to this forum so, please be patient with me. I need advice in an arducopter set-up that I'm building. This is what I have so far:
Ardupilot Mega
oilpan board APM
4X AXI 2208/34 motors
4x ACE 40A esc BIG-40 7-4V 18.8V
MAGNETOMETERS
GPS
spektum AR6100E RX
custom build power distribution
2x 8x3.8 SF SLO-FLYER PROPS
2X 8x3.0 SL-FLYER PUSHER
Any possible comments in regards to hardware incompatibility would be greatly appreciated.
Replies
why do you have different propellers?
that's not good