Hi all,

I just start with this APM 1.4 2560 + MTK GPS. I have update the MTK firmware to the newer version.

But have some problem with the GCS. The flight version is ArduCopter 2.9.1 for X quad.

Here is the problem on GCS

3691006793?profile=original

It wouldn't ARM and the GPS aren't connect on this view. But if I go the "Terminal Tab"  and tests it, see like the GPS are connect well with 9 satellite

3691007157?profile=original

My APM works well with ArduCopter 2.6 earlier firmware, but the compass seem to reverse at the GCS True North it read South. and how to calibrate the Accel? If I update the ArduCopter 2.9.1 my radio wouldn't calibrate (not connect at all - no respond).

3691007214?profile=original

What is the problem? My OilPan? Or need to change the APM with 2.5?

And also the BMP085 are fail. It read the altitude -21474836.00 (at the field was 663)

3691007138?profile=original

I try to upload the ArduCopter 2.9.1 sketch with ArduPilot-Arduino-1.0.3 but the problem is variable or field 'Log_Write_Cmd' declared void . I read step by step at the wiki but still same result.

3691007235?profile=original

So anybody on this forum please help me out.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Hi Have the same problem, so please, witch solutions do you find to work? 

This reply was deleted.

Activity

Abdulatif Tlaib liked Ryan's profile
19 hours ago
DIY Robocars via Twitter
RT @SmallpixelCar: First time at @wsraceways. After tuning @HokuyoUsa lidar signal and camera sensor on @NVIDIAEmbedded, my car was able to…
Sunday
DIY Robocars via Twitter
RT @breadcentric: The handy bit about racing with self-driving cars is that one can type while the car is racing. Report from #AWSDeepRacer…
Jun 18
DIY Robocars via Twitter
RT @chr1sa: Our Bay Area @DIYRobocars meetup is now at 2,700 members. Next in-person events (in Oakland) are training day on July 17 and…
Jun 18
DIY Robocars via Twitter
Videos from the ICRA autonomous racing workshop are now available: https://linklab-uva.github.io/icra-autonomous-racing/
Jun 10
DIY Robocars via Twitter
RT @SmallpixelCar: Prepared race track for Warm Spring Raceways @wsraceways and looking forward to test my new car at RAMS RC @ramsaicar fa…
Jun 6
DIY Robocars via Twitter
RT @f1tenth: Trying out some nasty blocking maneuvers 🏎️🤖 #f1tenth #autonomousracing https://t.co/nMTstsaogM
Jun 5
DIY Robocars via Twitter
May 27
DIY Robocars via Twitter
RT @araffin2: I will talk this Saturday from 18:00 to 19:00 Paris time for the @diyrobocars community about learning to race in hours using…
May 27
DIY Robocars via Twitter
RT @a1k0n: Luckily the infeasible hairpin problem was easily reproducible in simulation and I could test the fix before bringing the car ba…
May 26
DIY Robocars via Twitter
RT @a1k0n: Another problem was that I was over-constraining the car's allowed accelerations, so it didn't think it could turn as tight as i…
May 26
DIY Robocars via Twitter
RT @a1k0n: Breaking the map up into two halves worked, but I had to be more careful about separating the inner track from outer. There's se…
May 26
DIY Robocars via Twitter
RT @a1k0n: Here's a datalog for my fastest lap of the day. Lap timer is tiny window lower-left. https://t.co/myrlWWrKUY
May 26
DIY Robocars via Twitter
May 26
DIY Robocars via Twitter
RT @a1k0n: Here was my car's POV. Man this track is confusing in first-person! After the incident my camera was all scuffed up and I was af…
May 23
DIY Robocars via Twitter
RT @circuitlaunch: Loved seeing so many familiar (masked) faces at Circuit Launch today for our first in person @diyrobocars in over a year…
May 22
More…