Discussions

APM 2.6 Schematic

Posted by Michael Walker on July 15, 2014 at 5:50pm

Would anyone know if there are Eagle files for the 2.6 board?

I have an intermittent connection on the 3DR connector for some reason and I want to know if I can jumper over to the pads labeled UART2.

Mike

You need to be a member of diydrones to add comments!

Email me when people reply –

Replies

- - - - Michael Walker > Michael Walker July 16, 2014 at 2:29pm
        
        Thanks for all the help. I learned a few things today.
        
        The hardware warranty from 3DR Robotics is only 90 days from date of purchase
        
        That I am 90% sure that the failing part is the TS5A23157, so since they are only $1.10 each from Digikey, I thought I would order 1 and replace it (plus $8 shipping)
        
        I also confirmed that the problem is on the APM, as when I swapped it out for another one, it started to work. Many thanks for Zoltan at NG Hobbies in Toronto for lending me his spare APM to test with.
        
        Once I have replaced it tomorrow, I will let everyone know if my final guess was correct.
        
        Welcome
        
        Your one stop FPV resource center
      - Richard (DK) > Michael Walker July 15, 2014 at 11:42pm
        
        Check link at bottom of page http://store.3drobotics.com/products/apm-2-6-kit-1
        
        Eagle files Open-Source-Hardware
        
        http://3drobotics.com/wp-content/uploads/2014/02/APM_v252_RELEASE.zip
        
        Eagle Freeware download:
        
        http://www.cadsoftusa.com/download-eagle/freeware/?language=en
        
        Michael Walker > Richard (DK) July 16, 2014 at 6:17am
        
        awesome... thanks

1
2

of 2

This reply was deleted.

Activity

#xg { position:relative;top:120px; } #xn_bar { top:120px; }

Hello, you need to enable JavaScript to use diydrones.

Please check your browser settings or contact your system administrator.