APM:Plane 2.78 released - get intro FAILSAFE although rc in manual mode - Discussions

I upgrade APM 2.5 from FW2.76 to 2.78 and almost cut myself.

My throttle is calibrated on reverse, the new throttle fail safe was checked

When restart the APM it is automatically going into failsafe mode although radio sets manual as can be seen in config/flight mode

I can change the flight mode but it does not change the failsafe message in flight data.

(that failsafe opened accidentally the motor to full)

Urgent advice is required !!!

Thanks

Avi

tlog file is attached (Please do not pay attention to the plain orientation since I shifted the APM from its position)

prof.avi.levy February 1, 2014 at 6:04am

After reversing the speed controll problrm solved
Moderator

Graham Dyer January 30, 2014 at 10:59am

It may be worth posting your problem in this forum: http://ardupilot.com/forum/viewforum.php?f=96 as it might get lost here.
prof.avi.levy January 30, 2014 at 10:04am

When taking off the throttle fail safe and initiating the APM it worked and get the manual from the radio

Can it be a bug related to chanel reverse or a falut in my setup?

This reply was deleted.