Discussions

 Hi . I use the APM v1.4 in Multiplex Mentor.

I upload the Arduplane v2.68.

My problem is to Manual Level ( Autolevelling option).

After many, by the book, home level calibrations the manual level=1 is not working. To Fly the airplane stable in stabilization mode,  i do the calibration again ( Manual Level procedure in Mission Planer with Manual level = 1)  in airfield , and, after modem connect  i pushing the reset button .   
So i want to ask if any of you have similar problems with Manual level in APM v1.4 . or the manual level option is not working with APM v.1.4

2013-04-12 11-28-56.tlog