Gender
Male
About
Location
Rethymno, Crete
Please tell us a bit about your UAV interest
talosfpv.blogspot.com
Hometown:
Rethymno-Crete
Activity Feed
"Nobody can deny the humanitarian need that exists at this moment. But no one can bypass the serious security issues that exist. A possible leak critical material to the ISIS, which would acquire the portfolio was causing significant problems for…"
"Once the export restrictions for Pixhawk and other "critical" 3dr products, "are open", the next second the ISIS portfolio there will an UCAV."
The Public Order Ministry is in talks with Israeli firms regarding the acquisition of unmanned aerial vehicles (UAVs), commonly known as drones, to bolster the efforts of the Greek Police (ELAS) to monitor the country’s borders and curb illegal…
" I like it, very nice . I think this is the step to full working coptit in GCS ..."
"Hi to all , i want to ask . When i connect the APM 2.5 with usb cable (only) , the mode after ARM situation is AUTO . Is Normal that ?
Thank you"
Thank you"
"Excellent Work Aaron ."
"@Euan
Dear Euan, with the latest codes, Power modules adjust automaticly. with small variances from the linkage-batterie-connectors-load etc. altitude report depents on the sat count. but generally you are between standards for both. If you need any…"
Dear Euan, with the latest codes, Power modules adjust automaticly. with small variances from the linkage-batterie-connectors-load etc. altitude report depents on the sat count. but generally you are between standards for both. If you need any…"
"I use a Scorpion SII 3014 1040kv motor with 11x6 prop. My Battery is a Zippy Flightmax 5800 mAh 4S1P, with a turnigy plush 60A ESC. I program my Tx (Futaba 8UAPS) to ATV throttle to max 40% .
My flight time is about 20-25 min
"
My flight time is about 20-25 min
"
"Giovanni you are welcome . I m looking forward for your test . Today i upload to APM the latest code v2.71 seems to be ok with auto level, but the weather does not allowed to fly. The Pid parameters was test with calm wind 4 bf max ."
"The KML file2013-04-12 11-28-56.tlog.kml"
Hi . I use the APM v1.4 in Multiplex Mentor.I upload the Arduplane v2.68.My problem is to Manual Level ( Autolevelling option).After many, by the book, home level calibrations the manual level=1 is not working. To Fly the airplane stable in…
"Hi Daniel . I use the last month the same airframe with APM v 1.4 . My parameters posted in
http://www.diydrones.com/forum/topics/multiplx-mentor-pid-parameters
If you use the same autopilot hardware , i want to ask you if you have any problems…"
http://www.diydrones.com/forum/topics/multiplx-mentor-pid-parameters
If you use the same autopilot hardware , i want to ask you if you have any problems…"
"This is the NEXTSTAR PID parameters.nextstar may2012.param"
