So my success rate on the forum is much better than with support, so here is my next question. During the final power distribution assembly the directions say to just plug the motor into the ESC. Since the motors all have 3 different colored leads and the ESC connectors are marked "A" "B" "C" I am thinking that there is a correct way to plug these in and that doing it incorrectly could be very bad. However the directions say nothing about a correct order that I can see.
Can you just plug any motor lead into any ESC output?
Replies
Yes you may, and, if the motor rotates in the wrong direction under power you simply swap two of the motor lead wires. Either way, nothing bad should happen. Have fun!