Discussions

Can't trigger my Canon S100 from Pixhawk :/

Posted by Global_Saffer on March 11, 2016 at 10:29am

Hi All,

I have been trying to get my Iris+'s Pixhawk to trigger my Canon S100.  I have been following the Tuffwing instructions, but with no success.

BEC is soldered where the TX60 for the battery joins the board. I have KAP 3.6 on the camera, and I can get the intervelometer to work easily.  Just not the trigger :/

http://www.tuffwing.com/support/pixhawk_camera_trigger_cable.html

What could I be doing wrong?

3691281559?profile=original

You need to be a member of diydrones to add comments!

Join diydrones

Tags: camera, chdk, trigger
Email me when people reply –
Follow

Replies

  • Thomas Stanley-Jones March 11, 2016 at 11:13am

    I can't quite tell, but is the red wire for the 5v power from the Turnigy UBEC connected to the middle pin?  It looks like it might be connected to the bottom pin, which is for the signal...  (it should be in the middle pin, + )

    • Global_Saffer > Thomas Stanley-Jones March 11, 2016 at 11:32am

      Hi Thomas,

      Yes, it's in the middle pin...

      • Marcus Wright > Global_Saffer March 12, 2016 at 5:20pm

        If you are following tuffwing's directions exactly it looks like you have the trigger in RC5 and not Aux5 (relay pin 54). 

        • Global_Saffer > Marcus Wright March 13, 2016 at 1:58pm

          Hi Marcus, Thank you!  I noticed that after I posted, but there was still a problem.  I got on the line with Tuffwing, and we troubleshot for quite a while.

          There were some settings in the CHDK scripts that needed changing for the Iris+, and a few MP parameters needed changing as well.

          All of which wouldn't have mattered, had I not plugged it in the right way :p

          • r4space > Global_Saffer May 18, 2016 at 8:06am

            Hey Byron,

            Could you post the CHDK script you used in the end? - also trying to do this...

  • Global_Saffer March 11, 2016 at 10:30am

    Also, the copter is being powered by the battery. The photo shows it connected via the USB.

This reply was deleted.

Activity