I'd like to share my Hexacopter Multicopter setup and first flight results.
After spending too much time with plastic props and a HoverFly SPORT Flight Controller,
I changed to a DJI Naza FC and Graupner Style Carbon props.
Setup:
Pulso U28-M motors (2814-22) 760 Kv (Same as Avroto and many others)
Carbon 11" x 5.5" props
HiPro 40A ESCs (400Hz)
2x 4S 5000mAh Zippy LiPo Batteries
Gains in this video:
Atti Gains 200-200 with 220 Yaw and 100 Vertical Gain. Basic gains on 90-90.
Yaw and vertical to be turned-up.
Flight done in Manual Mode.
This video is without any payload.
Flying Weight is 3150g and typical flight time is 15 minutes.
Has also been flown with 3Kg of payload.
You need to be a member of diydrones to add comments!
Replies
CarbonCore now has a new office phone number, that can be found on the website.
I'd like to share some new photos of the Y6 Co Axial Multicopter that can also use the exact same setup as the Hexacopter, above.
More photos here in the Y6 website listing
I'd also like to add that all CarbonCore Multicopter kits have socket head bolts and 3mm thick motor mounts