Gender
Male
About
Location
York, North Yorkshire
About Me:
RC Electric Model Helicopter enthusiast - 15 years heli experience to 2018 and been in RC sine I was 13, starting on 2ch slope gliders. 3D AutoCAD and rapid manufacturing enthusiast. Director CarbonCore Ltd 7 years
Please tell us a bit about your UAV interest
Aeromodeller, Multicopter/Drone and camera mount designer.
Hometown:
York UK
Activity Feed
Hello DIYDrones forum!I’m posting requesting some help on this setup please. (And for reader interest). Mission Planner gives the PreArm Warning: Battery Failsafe. And prevents arming. Unless I disable the volt and current sensor, in which case the…
"Cortex X8 with DJi A2, Antenna Suit, 6S 10Ah Batt, 15 & 16" Carbon propellers, now has a 10X optical zoom camera, with a flying weight of 4.48Kg. With Blue tinted top plate. First flight tomorrow with the camera gimbal fitted. Expected flight time:…"
"CarbonCore Build Thread Wired up the PixHawk Cube Cortex. Just got the signal plugs then all standard ArduPilot software/firmware calibrations and setup. The A2 Cortex is open for inspection and now has a little gimbal with 10X optical zoom wired…"
"PixHawk Cube mounted directly with the four supplied bolts. Fixed Leg Brackets fitted with a 6th hole drilled for each. Grommets super glued in and coloured taped added to the arms and legs."
"Fitting motors and ESCs. These are Tiger Motors 3510’s with Tiger AIR 30 ESCs. I’m ‘hardwiring’ these arms without plugs and sockets, so the cables go straight into the drone. The transparent heat shrink provided for the ESCs was on the short side.…"
Starting a new Cortex build, then flight testing before being made available for sale. Ready to Fly CarbonCore’s are on the website http://shop.carboncore.co.uk/Shop/Ready-to-FlyAnd there’s a lot more photos on the facebook page…
"SOLVED So it was my new customer “TriTech Ted” that found the solution:
Install the older version for win10 v6.7.5 of the re-numerated driver CP210X X64 from this link. https://www.silabs.com/products/development-tools/software/usb-to-u...
We…"
Install the older version for win10 v6.7.5 of the re-numerated driver CP210X X64 from this link. https://www.silabs.com/products/development-tools/software/usb-to-u...
We…"
"I've checked that the windows 10 TABLET is on X64, and not X86.And so uninstalled the CP210X driver, reset the tablet, and manually re-installed the X64 CP210X driver.
Still no luck :(
COM3 is the only option, and that is what shows-up in the device…"
Still no luck :(
COM3 is the only option, and that is what shows-up in the device…"
"I've Read the Rules. I'm already enjoying being back on the forum! Proud to say I feel confident with ArduPilot after using it in PixHawks for four years. Very much enjoying the new PixHawk Cube 2.1. I am CarbonCore Ltd in Yorkshire UK. I'm also…"
"I am yet to see if I have email notifications setup for DIYDrones.I'm returning after spending two years being brainwashed by - I mean working with ex-RAF officers.If you need me, please get me through the Facebook page…"
Can anyone offer advice on making the 3DR SiK Data Radio work with a Windows 10 Tablet please?3DXR.co.uk say I have the correct CP210X driver. There is NO yellow warning triangle on the driver in the Device Manager. (I had to Disable Driver Signing…
"CarbonCore representative CopterSquad.com in Germany, have produced a new video preview of the CarbonCore Cortex. To see this new video, please visit www.CarbonCore.com"
We are soon to release a completely new Multicopter. Please visit www.CarbonCore.com for full photos and specifications. The Cortex is a Co-Axial Quad, similar to an Octocopter. And folds-up! Retracting Legs (for camera view) also protect the props…
"How can admin be contacted for Dronepedia please? We would like to correct and contribute information."
CarbonCore.co.uk Hexa 950 with 15 inch props Zenmsue 2x 6S LiPo Multicopter
