Demoing a FLIR One on a drone

In February 2019 I want to demo how thermal imaging can be done for search and rescue. All I have available is a FLIR One camera, a drone, a gimbal, a Raspberry Pi, and a wireless 5.8GHz transmitter and receiver.

Obviously there will be some code needed and instructions on how to put it all together. Unfortunately, I have not been able to find this information, but I am sure someone has already done it.

The whole purpose of this demo is not to show the best thermal images, but just to do a proof of concept, and we are doing it indoors at short ranges. We are budget constrained, but if it goes over well, I think the money will come later. This demo is for a group of people who regularly do search and rescue.

So if someone here knows where I can find this information, I would be most grateful. It will need to be done quickly, since February is only about two months away. Its Dec 18, 2018 now.

BTW, this is my first post on this forum, so please be nice! :) Thanks.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

This reply was deleted.

Activity

Mike Whitney liked Mike Whitney's profile
Jul 19
DIY Robocars via Twitter
Jul 2
DIY Robocars via Twitter
Jun 26
Abdulatif Tlaib liked Ryan's profile
Jun 24
DIY Robocars via Twitter
RT @SmallpixelCar: First time at @wsraceways. After tuning @HokuyoUsa lidar signal and camera sensor on @NVIDIAEmbedded, my car was able to…
Jun 20
DIY Robocars via Twitter
RT @breadcentric: The handy bit about racing with self-driving cars is that one can type while the car is racing. Report from #AWSDeepRacer…
Jun 18
DIY Robocars via Twitter
RT @chr1sa: Our Bay Area @DIYRobocars meetup is now at 2,700 members. Next in-person events (in Oakland) are training day on July 17 and…
Jun 18
DIY Robocars via Twitter
Videos from the ICRA autonomous racing workshop are now available: https://linklab-uva.github.io/icra-autonomous-racing/
Jun 10
DIY Robocars via Twitter
RT @SmallpixelCar: Prepared race track for Warm Spring Raceways @wsraceways and looking forward to test my new car at RAMS RC @ramsaicar fa…
Jun 6
DIY Robocars via Twitter
RT @f1tenth: Trying out some nasty blocking maneuvers 🏎️🤖 #f1tenth #autonomousracing https://t.co/nMTstsaogM
Jun 5
DIY Robocars via Twitter
May 27
DIY Robocars via Twitter
RT @araffin2: I will talk this Saturday from 18:00 to 19:00 Paris time for the @diyrobocars community about learning to race in hours using…
May 27
DIY Robocars via Twitter
RT @a1k0n: Luckily the infeasible hairpin problem was easily reproducible in simulation and I could test the fix before bringing the car ba…
May 26
DIY Robocars via Twitter
RT @a1k0n: Another problem was that I was over-constraining the car's allowed accelerations, so it didn't think it could turn as tight as i…
May 26
DIY Robocars via Twitter
RT @a1k0n: Breaking the map up into two halves worked, but I had to be more careful about separating the inner track from outer. There's se…
May 26
DIY Robocars via Twitter
RT @a1k0n: Here's a datalog for my fastest lap of the day. Lap timer is tiny window lower-left. https://t.co/myrlWWrKUY
May 26
More…