I have followed the instructions for downloading the recommended ArduPirates code.
When I download the code in Tortoise SVN I don't get the 25MB shown in the picture I get 1.28MB.
Any help would be most appreciated
Ken
You need to be a member of diydrones to add comments!
Replies
In the meantime you can use Tortoise SVN to download the sketches and libraries from the trunk.
Norbert
It takes way longer then the usual R2 Version.
Wait until upload done da steht.
i download the zip's today and after uploading nothing happens.
- no cli
- no config tool works
as contrast i installed arducoptermega, the public preview, and was able to hoover over my bed :-)
my minicopter is way too heavy above 300 gramm :(
needs a diet...
regards
robert
I am very new to all this as well...
I downloaded: http://ardupirates.googlecode.com/files/ArduPiratesNG-libraries.zip
and: http://ardupirates.googlecode.com/files/ArduPiratesNG-sketches.zip
Change the names to:
libraries.zip
and the other to ArduPiratesNG
Put both in the sketches - folder you can choose in the arduino tool unter preferences.
Then go to: http://ardupirates.net/config/APNG_Config.php
choose all the settings you like: important: +/x flight mode ....check the dip switches you have to change according to the pictures....
check you have chosen the right gps module.
Create the config.h file and save it. My file was called something like config1234023423.h change this to config.h and copy it into the ArduPiratesNG folder and overwrite the existing file.
I fly the mediatek gps module v1.6 and +. The only dip switch down is the first on the left...for me
Try it out.
CyberCrash