Hi!

I have been able to build before but for some reason I deleted the IDE so I had to download it again and now I cant build. Doesn't give any error messages so I dont even know where to start.

I downloaded the modified version of the IDE and configured it according to the instructions.I also cloned a new copy of trunk from github.

This is all that the IDE says when I press verify.

3691070520?profile=original

Here are my preferences:

3691070541?profile=original

I have also selected HAL Board->ArduPilot Mega 2.x and restarted.

Any help wold be much appreciated.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Well, I have the same exact error and I've followed all the steps on the PDF. Installed AVR tools with all the defaults, installed Arduino special version on the link (and put it on my c:\ folder just as it's mentioned ), configured Arduino, choosed the sketch folder, choosed the board as well as HAL, but I still have that error... can anyone remembre anything else I might be doing wrong ?

  • Sorry for the short answer I was in the car, of course at a stop light ;).
  • Thanks. Installing the tools was the key. For any others interested, here is the link to the manual:

    http://firmware.diydrones.com/Tools/Arduino/How%20to%20Build%20Ardu...

  • On the download site
  • Problem solved. Instructions on website isn't updated. Read the pdf
  • All I get is the first two lines of your output and the "Error compiling" message. Surely there is a log file somewhere with the actual errors?

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @TinkerGen_: "The Tinkergen MARK ($199) is my new favorite starter robocar. It’s got everything — computer vision, deep learning, sensor…
Monday
DIY Robocars via Twitter
Monday
DIY Robocars via Twitter
RT @roboton_io: Join our FREE Sumo Competition 🤖🏆 👉 https://roboton.io/ranking/vsc2020 #sumo #robot #edtech #competition #games4ed https://t.co/WOx…
Nov 16
DIY Drones via Twitter
First impressions of Tinkergen MARK robocar https://ift.tt/36IeZHc
Nov 16
DIY Robocars via Twitter
Our review of the @TinkerGen_ MARK robocar, which is the best on the market right now https://diyrobocars.com/2020/11/15/first-impressions-of-tinkergen-mark-robocar/ https://t.co/ENIlU5SfZ2
Nov 15
DIY Robocars via Twitter
RT @Ingmar_Stapel: I have now explained the OpenBot project in great detail on my blog with 12 articles step by step. I hope you enjoy read…
Nov 15
DIY Robocars via Twitter
RT @DAVGtech: This is a must attend. Click the link, follow link to read the story, sign up. #chaos2020 #digitalconnection #digitalworld ht…
Nov 15
DIY Robocars via Twitter
RT @a1k0n: Got a new chassis for outdoor races (hobbyking Quantum Vandal) but I totally didn't expect that it might cause problems for my g…
Nov 11
DIY Drones via Twitter
First impressions of the Intel OpenBot https://ift.tt/36qkVV4
Nov 10
DIY Robocars via Twitter
Nov 9
DIY Robocars via Twitter
Excellent use of cardboard instead of 3D printing! https://twitter.com/Ingmar_Stapel/status/1324960595318333441
Nov 7
DIY Robocars via Twitter
RT @chr1sa: We've got a record 50 teams competing in this month's @DIYRobocars @donkey_car virtual AI car race. Starting today at 10:00am…
Nov 7
DIY Robocars via Twitter
Nov 6
DIY Robocars via Twitter
RT @a1k0n: Car's view, using a fisheye camera. The ceiling light tracking algorithm gave me some ideas to improve ConeSLAM, and having grou…
Nov 5
DIY Robocars via Twitter
RT @a1k0n: To get ground truth I measured the rug, found the pixel coordinates of its corners, calibrated my phone camera with my standard…
Nov 5
DIY Robocars via Twitter
RT @a1k0n: @DIYRobocars is back in December, but outside. Time to reinvestigate ConeSLAM! I rigged up a quick and dirty ground-truth captur…
Nov 5
More…