Hello to everyone,
This is my first post on this forum and I would like to share some data that I determined experimentally. The test was originally set up to determine if two overlapping rotor disks performed any differently than two non-overlapping rotor disks. I found that there was about a 10% loss in lift capacity for overlapping disks at the same wattage as the non-overlapping disks. Other than that, there we no other remarkable observations in sound, vibration, pulsing, etc.
Here is a .bmp chart for the test with non-overlapping disks. My apologies for the "demo"s.Watts is total watts input into the two ESCs. Lift is measured at liftoff of the test fixture.
If you have any further questions, please feel free to contact me at:
occamrazr <at> yahoo.com
Replies