Hello. I'm trying to reduce vibrations for aerial filming. I've already tried everything i can imagine.
I have Tarot 650 sport with 14" props, x4108s sunnysky 600kv motors and 4s battery.
One of my last ideas was: frame is not stiff enough. So my frame is stiffened with aluminium. It reduces vibrations but not much.
Props and motors are balanced as good as i could.
Pixhawk is mounted on plate which is on rubber balls. Battery and gimbal is connected to this plate.
VibeZ is ~12 when hovering and grows up to 35 when flying at 30km/h (~19 mph).
Maybe someone can give me advice what else i can do to eliminate vibrations.
I'm attaching last flight log, screenshot of "vibe vs speed" and photo of copter.
Any advice can become very helpful. Thank You!
Replies