Discussions

How to assemble KDA 20-22L motor

Posted by Steven Chang on September 8, 2010 at 11:26pm
Hi guys

I'm a new comer to DIY drones and RC planes
I recently bought a KDA 20-22L motor
its a brushless outrunner
but there are so many components that came along
I just dont know where to fit what.
can anyone complete the following list for me please
A20L Brushless motors
1 Wire coating for connection point between motor wires and item2
2 Connecting headers of the motor wire. Connect to batteries? or ESC?
3 ?
4 extra motor shaft
5 ? there is another piece attached to the motor shaft
6 motor mount
7 not quite sure what these screws are for
8 ?
9 ?

Thanks for ur time
Steve

You need to be a member of diydrones to add comments!

Join diydrones

Tags: 20-22l, ka
Email me when people reply –
Follow

Replies

  • Peter Seddon September 9, 2010 at 3:57am
    1. Heat shrink Sleeves for insulating connectors (item 2)
    2. Electrical connectors to fit between motor and ESC. Put male to motor and female to ESC.
    3. Bands for prop saver (item 8) for securing prop
    4. Spare main shaft
    5. Spare circlip (fitted to front of shaft)
    6. Mounting plate for rear rather than front mounting of motor. This screws on to the face plate where the shaft projects.
    7. Screws for securing item 9 to motor
    8. Prop saver type prop driver
    9. Rear mounting prop driver. Screws to rear of motor when using item 6.

    Peter
This reply was deleted.

Activity