Discussions

Posted by solar on January 29, 2014 at 3:44am

Hi guys,

Can someone help me wire these all together so that the servo receives 6-7 V from the external BEC.

The APM 2.5 needs to be connected somehow too.

There is no transmitter or receiver by the way- it is for an autonomous boat.

Thanks

You need to be a member of diydrones to add comments!

25, apm, conections

Email me when people reply –

solar January 30, 2014 at 6:09am

You hope what works for me? The setup in the image is not yet complete. The BEC is required because I need 6 to7v to the servo and the internal BEC in the ESC is much smaller.
Andie Gray January 30, 2014 at 5:43am

I hope this works for you.

BEC not required

ESCWiring.jpg

https://storage.ning.com/topology/rest/1.0/file/get/3692936847?profile=original
solar January 30, 2014 at 4:01am

I would really appreciate a response.

Can someone have a stab at how the battery connects to the system and what I do with the remaining ESC wires that are not connected to the ESC.

Someone please respond!

This reply was deleted.

#xg { position:relative;top:120px; } #xn_bar { top:120px; }

Please check your browser settings or contact your system administrator.