About

Gender

Male


Location

Birmingham


Please tell us a bit about your UAV interest

df


Hometown:

Birmingham


Activity Feed

solar replied to Angus Tang's discussion Newcastle University International Singapore doing our Final year project on Quadrotor
"I see. My final year project is an autonomous boat.

The way I calculated the approximate motor power needed for the boat was to scale the size and its motor to the size of the boat I would be using .

My supervisor advised this method, and it…"
Feb 10, 2014
solar replied to Angus Tang's discussion Newcastle University International Singapore doing our Final year project on Quadrotor
"As a starting point why don't you look at existing quad copters that can carry the payload you require (3kg) and scale the weight and propeller speed and size to the one you intend to make.

This is the way that has been recommended to me to find…"
Feb 9, 2014
solar replied to solar's discussion Setting up an ESC with an APM 2.5 (with no transmitter)
"I understand it is a risk, but it is a risk I will take due to it operating within controlled areas"
Feb 2, 2014
solar posted a discussion
Hi,Can someone give me a quick break down on how to set up an ESC with a 3DR APM 2.5?This is for a fully autonomous application- so no transmitter or receiver is incorporated with the control system.Am I correct in thinking that you take the…
Feb 2, 2014
solar replied to solar's discussion How to wire the ESC, External BEC and APM 2.5 together
"You hope what works for me? The setup in the image is not yet complete. The BEC is required because I need 6 to7v to the servo and the internal BEC in the ESC is much smaller."
Jan 30, 2014
solar replied to solar's discussion How to wire the ESC, External BEC and APM 2.5 together
"I would really appreciate a response.

Can someone have a stab at how the battery connects to the system and what I do with the remaining ESC wires that are not connected to the ESC.

Someone please respond!"
Jan 30, 2014
solar posted a discussion
Hi guys,Can someone help me wire these all together so that the servo receives 6-7 V from the external BEC.The APM 2.5 needs to be connected somehow too.There is no transmitter or receiver by the way- it is for an autonomous boat.Thanks
Jan 29, 2014
solar replied to Jason Nowell's discussion Autonomous Survey Vehicle for Shipwreck Exploration
"I'm new at this but look at Ardupilot APM 2.5.
There is a lot of online forum support for it and code written for it and I think you'll find that it is the most commonly used autopilot on diydrones.

The Mission Planner software also allows you to…"
Jan 29, 2014
solar replied to solar's discussion How to connect APM 2.5, ESC with external UBEC
"Hi,

Can anyone help me in the above?..."
Jan 25, 2014
solar posted a discussion
Hi DIY drones,I am creating an autonomous boat.This is my schematic so far:I guess the above are my options? Can anyone suggest the best method and how to get the UBEC connected to the ESC?I am  stuck on the powering of the servo. The waterproof…
Jan 23, 2014