Hi Everyone.

It's been a while since I built my old tilt rotor tricopter in school.


I want to show off recent project I've been working on for the last 6 months. The goal was to simplify the task of programming robotics. To showcase this I built a 12 DOF walking robot. I used a hobbyking RF controller and my "Smart Servo Controller" and with out too much difficulty I made a biped walk. well kinda more like skate but close enough.

1ffu6r.jpg

The controller allows the mapping of signals from a RC controller to multiple outputs with different scaling and offsets. It also allows logic, control loops and animation playback features. The nifty part is it is all done with out having to write any code. 


I've started a kickstarter campaign for it and hope that it might help some people overcome the challenges of programming robotics or drones too. Check it out, it has lots of info about the project

https://www.kickstarter.com/projects/143152889/smart-servo-controller

Check out the video to see the robot walk. I still have to make the robot walk with the hand controller, but those are relatively high level commands compared to controlling each individual servo motor.

 

https://www.youtube.com/watch?v=CC9xPeqTY3Y

If you guys have any questions just let me know and I'd be happy chat. I'd like to invite you to like my facebook page and share the project with your friends if you find it interesting.

https://www.facebook.com/smartservocontroller

Thanks!
Mark Arnott

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @a1k0n: Did I get rid of hand-tuned parameters? Yes. Am I still hand-tuning more parameters? Also yes. I have a few knobs to address the…
Monday
DIY Robocars via Twitter
RT @a1k0n: I'm not going to spoil it, but (after charging the battery) this works way better than it has any right to. The car is now faste…
Monday
DIY Robocars via Twitter
RT @a1k0n: Decided to just see what happens if I run the sim-trained neural net on the car, with some safety rails around max throttle slew…
Monday
DIY Robocars via Twitter
Sep 24
DIY Robocars via Twitter
RT @SmallpixelCar: @a1k0n @diyrobocars I learned from this. This is my speed profile. Looks like I am too conservative on the right side of…
Sep 24
DIY Robocars via Twitter
RT @a1k0n: @SmallpixelCar @diyrobocars Dot color is speed; brighter is faster. Yeah, it has less room to explore in the tighter part, and t…
Sep 24
DIY Robocars via Twitter
RT @a1k0n: I'm gonna try to do proper offline reinforcement learning for @diyrobocars and throw away all my manual parameter tuning for the…
Sep 23
DIY Robocars via Twitter
RT @circuitlaunch: DIY Robocars & Brazilian BBQ - Sat 10/1. Our track combines hairpin curves with an intersection for max danger. Take tha…
Sep 22
DIY Robocars via Twitter
RT @SmallpixelCar: Had an great test today on @RAMS_RC_Club track. However the car starts to drift at 40mph. Some experts recommended to ch…
Sep 11
DIY Robocars via Twitter
RT @gclue_akira: 世界最速 チームtamiyaのaiカー https://t.co/1Qq2zOeftG
Sep 10
DIY Robocars via Twitter
RT @DanielChiaJH: Always a good time working on my @diyrobocars car at @circuitlaunch. Still got some work to do if I’m to beat @a1k0n howe…
Sep 10
DIY Robocars via Twitter
RT @SmallpixelCar: My new speed profile for @RAMS_RC_Club track https://t.co/RtLb7TcgIJ
Sep 10
DIY Robocars via Twitter
RT @SmallpixelCar: Practiced at @RAMS_RC_Club today with my new @ARRMARC car https://t.co/AEu2hCx89T
Aug 28
DIY Robocars via Twitter
Aug 24
DIY Robocars via Twitter
RT @gclue_akira: 柏の葉で走行させてるjetracerの中身 #instantNeRF #jetracer https://t.co/giVvuE4hP7
Jul 4
DIY Robocars via Twitter
Cool web-based self-driving simulator. Click save when the AI does the right thing https://github.com/pncsoares/self-driving-car
Jul 4
More…