Hi guys.. I wonder of any of you have any ideas on how to reduce a wobble.  I went through all the steps as I did when I built the quad and installed firmware 2.7.3.  I'm attaching my flight logs hopefully someone can give me advice.  The wobble is left right forward and back ... the wobble was around 60hz.

Attached you will find my log

2014-04-20 05-54-23.log

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Update...the new firmware is buggy on APM 2.0.    I got tired of dealing with 3dr and switched to a multiwii pro. Cheaper.  Much cheaper.plus can run multiwii, ardupirate, and arducopter

    It is very stable.

  • Not sure if this is with yours but, when I upgraded mine I had a bad wobble also. Looking around the settings it ended up being Roll and Pitch P values of the PID increased about 50% (~0.085). I lowered the values to the previous stable values (~0.054) and the copter is fine. Hope this helps....

    • Thanks!  That makes sense.     I adjusted those values back when I was running 2.7.3 but I didn't have a wobble then, it was a slower wobble so it was more like a drifting circle.

      I'll try it.. right now I need to rebuild my quad.     crashed.  I had a wobble but it was stable, but for some reason when the battery power went  low the fail safe cause my quad to fly away.    A tree caught it.   Now I am rebuilding it.

      I'll turn  failsafe off until I know what happened.  My fail safe was RTL.

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @a1k0n: Did I get rid of hand-tuned parameters? Yes. Am I still hand-tuning more parameters? Also yes. I have a few knobs to address the…
yesterday
DIY Robocars via Twitter
RT @a1k0n: I'm not going to spoil it, but (after charging the battery) this works way better than it has any right to. The car is now faste…
yesterday
DIY Robocars via Twitter
RT @a1k0n: Decided to just see what happens if I run the sim-trained neural net on the car, with some safety rails around max throttle slew…
yesterday
DIY Robocars via Twitter
Saturday
DIY Robocars via Twitter
RT @SmallpixelCar: @a1k0n @diyrobocars I learned from this. This is my speed profile. Looks like I am too conservative on the right side of…
Saturday
DIY Robocars via Twitter
RT @a1k0n: @SmallpixelCar @diyrobocars Dot color is speed; brighter is faster. Yeah, it has less room to explore in the tighter part, and t…
Saturday
DIY Robocars via Twitter
RT @a1k0n: I'm gonna try to do proper offline reinforcement learning for @diyrobocars and throw away all my manual parameter tuning for the…
Friday
DIY Robocars via Twitter
RT @circuitlaunch: DIY Robocars & Brazilian BBQ - Sat 10/1. Our track combines hairpin curves with an intersection for max danger. Take tha…
Thursday
DIY Robocars via Twitter
RT @SmallpixelCar: Had an great test today on @RAMS_RC_Club track. However the car starts to drift at 40mph. Some experts recommended to ch…
Sep 11
DIY Robocars via Twitter
RT @gclue_akira: 世界最速 チームtamiyaのaiカー https://t.co/1Qq2zOeftG
Sep 10
DIY Robocars via Twitter
RT @DanielChiaJH: Always a good time working on my @diyrobocars car at @circuitlaunch. Still got some work to do if I’m to beat @a1k0n howe…
Sep 10
DIY Robocars via Twitter
RT @SmallpixelCar: My new speed profile for @RAMS_RC_Club track https://t.co/RtLb7TcgIJ
Sep 10
DIY Robocars via Twitter
RT @SmallpixelCar: Practiced at @RAMS_RC_Club today with my new @ARRMARC car https://t.co/AEu2hCx89T
Aug 28
DIY Robocars via Twitter
Aug 24
DIY Robocars via Twitter
RT @gclue_akira: 柏の葉で走行させてるjetracerの中身 #instantNeRF #jetracer https://t.co/giVvuE4hP7
Jul 4
DIY Robocars via Twitter
Cool web-based self-driving simulator. Click save when the AI does the right thing https://github.com/pncsoares/self-driving-car
Jul 4
More…