I was just thinking since the biggest issued with quads is the Fly time and load capacity. Can i just add for small nitro engine from ebay :) well that means i would need a custom frame..
Thanks in advance/
You need to be a member of diydrones to add comments!
Eh Eh ,
we have a nitro/gas engine variable pitch quad :) And we're doing also vibration test ;)
The HG3.2 Multicopter has the following features:
Created by Joseph D'Angelo
Hardware and firmware development: Roberto Navoni
Electronic Edge: Ardubotix 1.0A (Multipilot)
Wheelbase: 1.65 m
Maximum dimensions: 2.60 x 2.60 m
V2 Version: hybrid
Electric Motor: Hacker A60
Petrol Engine: Zenoah
Blades: SAB Composite
Frame: DIY
Replies
we have a nitro/gas engine variable pitch quad :) And we're doing also vibration test ;)
The HG3.2 Multicopter has the following features:
Created by Joseph D'Angelo
Hardware and firmware development: Roberto Navoni
Electronic Edge: Ardubotix 1.0A (Multipilot)
Wheelbase: 1.65 m
Maximum dimensions: 2.60 x 2.60 m
V2 Version: hybrid
Electric Motor: Hacker A60
Petrol Engine: Zenoah
Blades: SAB Composite
Frame: DIY
Here we can found the video : http://www.virtualrobotix.com/profiles/blogs/hg32-preflight-check
Here you can found the full story : http://www.virtualrobotix.com/profiles/blogs/hg3-the-era-of-quad-va...
Blog of Giuseppe Pipposoft for the friends ;) : http://www.virtualrobotix.com/profile/GiuseppeDAngelo?xg_source=act...
I can just imagine the issue being magnified by having 4 engines at the end of long aluminum arms!