Discussions

Is PixHawk auto mode dependent to the Radio receiver?

Posted by Guilherme Morelli on May 30, 2017 at 10:44am

Hello,

this is a newbie question but it something that I haven't found any answer on the internet just yet.

Lets Say that I loaded a mission in a PixHawk 2.1 and after takeoff and trim the auto mode is triggered and the UAV is now following the mission uploaded in the Pixhawk. What would happend if a turn the radio off? Is it dependent to the receiver to continue the mission?

If I have a telemetry system to receive the flight info on a PC, can I comand the UAV via PC and telemetry? If so, is that comand dependent to the radio and receiver transmission?

Thanks

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Guilherme Morelli May 30, 2017 at 12:11pm

    Thanks a lot! I'll do it!

    Andre K. said:

    It's up to you to configure. Read about failsafe on Ardupilot.org
  • Andre K. May 30, 2017 at 12:10pm
    It's up to you to configure. Read about failsafe on Ardupilot.org
    ArduPilot Open Source Autopilot
    The most advanced open source autopilot for use by both professionals and hobbyist. Supports multi-copters, planes, rovers, boats, helicopters, ante…
This reply was deleted.

Activity