Redoing my 3DR Quad, when I originally built it, I used the 850Kv Motors, and Neewer SimonK 30amp ESC's, But they were only rated for 3s Battery. I'm moving to a 880kv Motor, and a 40amp also Simonk ESC. 2s to 6s, I'd like to use a 4s Battery and the ESC i'm looking at only needs throttle programming done though Mission Planner.
anyone had any experiences with these ESC's Good or bad?
Thanks
Replies
Hey
I dont know the ESCs in you post at all so I cannot comment on them.
I've been using these (Just the 30A version)
http://www.ebay.com/itm/40A-ZTW-Spider-Series-2-6S-Lipo-OPTO-ESC-Si...
I have not had ANY problems... they are really responsive, they run cool on 4S. I can really recommend these. Calibration is a breeze as well
Hope this helps