Discussions

Mission Planner UDP and TCP/IP Connection

Posted by Warren Mall on October 6, 2012 at 6:26am

I have been trying to get the Mission Planner to accept UDP and TCP/IP inputs.

I keep getting a time out error on a UDP  connection.  I have tried various playback rates and real-time rates, but I always get a time out error.

Is there anything special with UDP and TCP/IP connections?

Thanks,

Warren

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Developer
    Michael Oborne March 25, 2014 at 4:35pm

    both tcp and udp should work. it is required to be 2 way however.

    • Jad Yaacoub > Michael Oborne March 25, 2014 at 4:44pm

      I'm using the wifly module connected to my board (crius aiop), the wifly and my pc are connected to a router, mission planner is seeing the udp connection but can't load the configuration, I get connection time out, I think I'm having a problem with port numbers.

      • Developer
        Michael Oborne > Jad Yaacoub March 25, 2014 at 7:48pm

        MP replies to the same ip/port that the packet originates from.

        • Jad Yaacoub > Michael Oborne March 30, 2014 at 11:35am

          I'm having this problem know that I can't get over, when i try to connect I get this message " getting params(sysid 1,compid1)--> the first image, and the the second message comes up --> the second image,i have set the MP to listen to port 2000 the same that my wifi module transmit on, and i have set the correct baudrate on my wifi module according to the serial on my board ( crius aiop 1.1 flashed with MPNG 3.01 r4), i don't know whats causing this problem.

          Thanks.

          3702752651?profile=original3702752949?profile=original

          https://storage.ning.com/topology/rest/1.0/file/get/3702752949?profile=original
          • Developer
            Michael Oborne > Jad Yaacoub March 30, 2014 at 4:11pm

            please use something like wireshark to see what is going on.

            • Jad Yaacoub > Michael Oborne May 8, 2014 at 12:33pm

              I solved my problem, it seems that there is a problem in megapirotng 3.01 r4 serial 2 and 0, when i flashed my board with the mpng 2.8 r3, the connection was established successfully using tcp connection.

              • Nikos > Jad Yaacoub February 22, 2016 at 6:56am

                Hello. I'm on a similar project. Which tcp port did you use to connect to it? Have you tried UDP port 14550? Thanks in advance.

    • Warren Mall > Michael Oborne March 25, 2014 at 4:43pm

      Do you have some example code?

      How do you do a two way on UDP?

  • Jad Yaacoub March 25, 2014 at 12:22pm

    Hi warren, I have the same problem now did you manage to solve it?

    • Warren Mall > Jad Yaacoub March 25, 2014 at 1:04pm

      No.

      I am thinking about just adding another receiver.

      That should be an easy way to bypass the problem.

This reply was deleted.

Activity