Discussions

Mystery Ublox Hardware

Posted by W. D. Michael on May 15, 2011 at 11:02am

　

Does anyone have any information on this board?　 I bought a couple to take the LEA-4T off - it's a long story but I need the phase measurements and the UBLOX 4 series is fine - but it occurs to me that I may be taking it off this board just to put it on a board with similar features.　 The problem is, I have no information on this board.

　

So, if you know anything about this board, I'd appreciate hearing what you think.

　

-wdm

　

3690868515?profile=original

You need to be a member of diydrones to add comments!

Join diydrones

Tags: gps, lea-4t, pcb, ublox
Email me when people reply –
Follow

Replies

  • Brandon Jones June 3, 2011 at 3:17pm
    Is that board from the eval kit? I am interested in obtaining a LEA-4T board....Where did you stumble upon that board?

    Thanks!
  • Anthony Wooldridge May 16, 2011 at 1:02pm

    I have reverse engineered this board.

    No need to take the unit off the board its a good useable board as it stands for serial i/o logic levels.

    I have a fairly simple modification that will convert it to usb operation powered from usb.

    A few track cuts and wire links and some tricky soldering.

    Regards

    Anthony

     

This reply was deleted.

Activity