Posted by Anthony Bee on February 21, 2011 at 6:57am
Alright, well the first place I started to look for help was the manual, I found that I can change the mixing, and reverse channels with the dip switches.I played around with the switches like they are suppose to be for V-tail mixing, and the V-tail working in Rc mode, and stabilize modes, however when It comes to actually stabilizing, only one tail fin will react to me tilting the plane around?Any help please =]I will try to embed a video, and add the link to the video!https://www.youtube.com/watch?v=L6RhrnMRuGg
You need to be a member of diydrones to add comments!
good news! i finally got all my programming right with the new set up!
V-tail needs ch 1,2 from APM, wings are on ch 4 (you will need to change your transmitter mode to accommodate)
Still cant get APM to stabilize its self, keeps starting up set up sequence to look for gps lock?
Replies
V-tail needs ch 1,2 from APM, wings are on ch 4 (you will need to change your transmitter mode to accommodate)
Still cant get APM to stabilize its self, keeps starting up set up sequence to look for gps lock?