Hi,
I recently revised my miniquad design and have some hardware left over from my first version.
1. Miniquad frame:
This frame is built using 1mm carbon plate and 4mm pultruded carbon tubing. Tubing is reinforced with internal fiberglass ferrules that have been epoxied in place. Motor mounts have been machined from aluminum and fit all motors with 6mm body tube. A slightly used set of HobbyKing 1811-2000 motors is included. Maybe flown for a total of 1 hour, no crashes.
$80 for complete setup including shipping
2. HobbyKing 1811-2000 motors:
Four unused 1811 motors in their boxes with all parts. $28 shipped for all four
3. HobbyKing GWS 4x2.5 propellers
This are the 'GWS-like' props that HobbyKing sells. They require some work to balance them, but they're the only props you can get in cw/ccw rotation. I have six unopened bags with 3 standard, 3 counterrotating props each.
I'll sell all six bags for $11 including shipping. If you want single bags, make me an offer!
Replies
I'll buy them.
I found the normal rotating ones but couldn't find the counter-rotating props.
If you still have them, i am ready to buy them for $11.
Email me: sulabh4guitar@hotmail.com
Hi Jan, also via this way. I am very intersted in your frame. I have just received an APM for a Tyni Quad.
I would by the frame, motors and props. I am living in Switzerland.
Best regards
Hans Jakob
Hi everyone, in case you are interested, the frame is still available! Contact me with any questions.
Hi Jan, I'm interested in the unopened motors and props. Will that be $40 shipped to Canada with shipping cost included in the price?