Hello everyone,

A week ago, my Pixhawk was working fine, i loaded Arducopter 3.1.5 FW, everything O.K, 

Im using this configuration for powering:

 http://diydrones.com/profiles/blogs/how-to-guide-pixhawk-with-6s-ba...

Yesterday i turn on the board, and suddenly pixhawk reboot. Since then when i power it via USB or

the configuration above i get these:

1. MAIN LED: OFF

2. FMU LEDS: power on / amber off 

3. I/O LEDS: power on / amber blinking 4Hz / blue blinking

4. The start up failed sound (http://planner.ardupilot.com/wp-content/uploads/sites/5/2013/06/Fai...)

This pattern means that i have no FMU INPUT, according to this page: 

https://pixhawk.org/users/status_leds

How can i fix this?

Thanks.

 

Views: 500

Reply to This

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service