I have done all the calibrations with Q7 transmitter. After arming, not even increasing the throttle 20% my quad gaining very fast while decreasing the throttle descending also very fast.What is the problem and how to solve it?Please help me friends..
You need to be a member of diydrones to add comments!
One month before I have tried pixhawk with kongcopter 700 (quad).i got the same problem but the transmitter was futaba t8j.
After the i replaced the nazar v2 fc with flysky fs i6x tx.. Then it was flying good..
Replies
I will try and let you know..
Thanks..
have you tried other flight modes such as altitude mode or position mode?
are you using a 3S or 4S lipo?
were you able to calibrate esc's through qgroundcontrol?
if the problem only lies with stabilize mode, the travel of throttle input might not center at the right point
After the i replaced the nazar v2 fc with flysky fs i6x tx.. Then it was flying good..
Hi Baskaran, if you can share a flight log (upload here: http://logs.px4.io/) we'll be able to see what's going on.
Can you describe what quad you have and which flight modes you've tried?