hi guys,
trying to set up my rpi zero w with pixhawk as per these insructions: http://ardupilot.org/dev/docs/raspberry-pi-via-mavlink.html
did a quick test to see if I get power by connecting power via usb to pixhawk ONLY and I don't seem to get anything.
am I assuming the wiring from a "large" raspberry pi would be the same for the zero?
to clarify I have connected the +5v but no power being drawn.
Replies
David, did you ever figure out your issue? I'm trying to do the same thing.
-
1
-
2
of 2 Next