Hi,
I posted in another area but perhaps this is where it should really go...
I have an Arduplane2 with an easystar to get started with this...
Im just wondering how people are typically connecting their AP2 to their radio, their batteries, and their servos. On the one hand it is pretty straight forward in that i connect the female connectors between the RX and the AP2...and the servos connect to the output on the AP2...the battery for the motor connects to an EC.
So, in short, how do i connect power to the AP2? If I want to have independent battery power for AP2, Im assuming I remove that jumper, but still, Im just not clear on where to attach the other BEC. I don't want to blow my board!
Thanks for any help. I might be totally missing something, and if so, apologies for the obvious.
Replies
for that matter...a simply wiring diagram would be helpful.