Hi All,

 

I`m having problems to upload the code to my new 2560 board.

Program: Arducopter Mega

Arduino 022

Board: Diydrones Mega 2560

Operating system: tried in Windows XP and MacOSX

 

When I try to upload the code the yellow leds in the board start blinking as normal and then I get the following error:

 

Binary sketch size: 123164 bytes (of a 258048 byte maximum)
avrdude: stk500_2_ReceiveMessage(): timeout
avrdude: stk500_2_ReceiveMessage(): timeout
avrdude: stk500_2_ReceiveMessage(): timeout
avrdude: stk500_2_ReceiveMessage(): timeout
avrdude: stk500_2_ReceiveMessage(): timeout
avrdude: stk500_2_ReceiveMessage(): timeout

 

and it keeps going with this timeout message. In windows the same problem happens but the only difference is that the timeout message don`t appear it just does nothing after the yellow leds blinks and stop.

 

Could you please help me to find out what`s happening? I've purchased two boards and exactly the same issue is happening with both.

I've selected the right board and serial port in arduino program.

 

Tks,

Leonardo

Views: 568

Reply to This

Replies to This Discussion

Just an update in this one. I've downloaded the ArduPilot Mega 2.0 beta and the upload worked perfectly, so it should be something with Arducopter Mega code that's still not ready for 2560 board.

Any idea on when it should be compatible if that's the case?

 

Regards,

Leonardo

I have verified that this is indeed an issue. Jason is aware of it and we'll fix it before the code is released in beta.

 

ACM works fine with the APM1280 board, of course.

Is there any results?

 

I have upload 2.0.54 easily to 1280 board.

Why doesn't it work with the 2560?

Reply to Discussion

RSS

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service